{"product_id":"heavy-duty-welded-black-powder-coated-picnic-table-frame-kit-2-3-8-od-11-ga-steel-6ft-or-8ft","title":"Heavy Duty Welded Black Powder-Coated Picnic Table Frame Kit – 2-3\/8\" OD, 11 Ga Steel, 6ft or 8ft","description":"\u003cp\u003eHeavy-duty commercial picnic table frame kit — 6ft or 8ft, welded steel, finished with a 4-stage industrial coating process built for real outdoor exposure, not just a spray booth.\u003c\/p\u003e\n\u003cp\u003eBuilt with 2-3\/8\" OD, 11 ga steel tubing — the same heavy spec used by premium competitors, at a fraction of the price. Where this frame really pulls ahead is the finish. Most \"powder coated\" outdoor furniture is exactly that and nothing more: a single layer of powder sprayed directly onto raw or lightly-prepped steel. It looks fine in the showroom and starts failing at the weld seams within a season or two, because spray-on powder can't get into tight corners, and there's nothing underneath it to stop corrosion once the coating chips or scratches.\u003c\/p\u003e\n\u003cp\u003eThis frame goes through a 4-step process before it ever sees a spray booth:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDegreasing\u003c\/strong\u003e — strips oils, mill residue, and contaminants from the raw steel so every later layer actually bonds instead of sitting on top of grime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcid pickling\u003c\/strong\u003e — removes mill scale and surface rust down to clean bare metal, the same prep step used in automotive-grade finishing, not typical patio furniture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eE-coating (electrophoretic deposition)\u003c\/strong\u003e — an electrically-charged primer bath that pulls coating into every weld seam, corner, and hidden surface a spray gun can't reach. This is the layer that actually stops corrosion, and it's the same core technology used to rustproof car bodies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutdoor powder coating\u003c\/strong\u003e — a UV-stable, weatherable exterior topcoat applied over the E-coat, giving you the color and finish you see plus a second line of defense the E-coat is already providing underneath.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe result is a duplex coating system — primer plus topcoat — instead of the single layer most \"powder coated\" frames rely on. Scratch through the top layer on a standard powder-coated frame and bare steel is exposed immediately. Scratch through this one and the E-coat underneath is still doing its job.\u003c\/p\u003e\n\u003cp\u003eHardware is stainless steel, not painted or galvanized — won't rust out over years of outdoor exposure. Welded one-piece construction is structurally stronger than bolted alternatives, and the 11 ga wall thickness is heavier than the 13 ga tubing found on most competing frames.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFrame Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2-3\/8\" OD tubing, 11 ga wall — heavier than industry-standard 13 ga\u003c\/li\u003e\n\u003cli\u003eWelded construction — stronger than bolted frame alternatives\u003c\/li\u003e\n\u003cli\u003eStainless steel carriage bolt fasteners included — corrosion-proof\u003c\/li\u003e\n\u003cli\u003e1-5\/16\" OD diagonal braces for structural rigidity\u003c\/li\u003e\n\u003cli\u003eExtra-wide tip-resistant design — won't tip even with unbalanced load\u003c\/li\u003e\n\u003cli\u003e4-stage finish — degreased, acid pickled, E-coated, then outdoor powder coated in black — far more corrosion protection than single-layer powder coating alone\u003c\/li\u003e\n\u003cli\u003eWorks with standard 2x10 lumber — purchase locally to save on freight\u003c\/li\u003e\n\u003cli\u003eOne frame kit fits both 6ft and 8ft tables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for campgrounds, RV parks, parks, schools, and municipalities. Frame only — lumber not included. Buying lumber locally cuts your total cost significantly compared to purchasing a fully assembled table shipped freight.\u003c\/p\u003e\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\u003ch3\u003eWhat is included?\u003c\/h3\u003e\n\u003cp\u003eThe welded black powder-coated steel frame and stainless-steel carriage-bolt hardware. Lumber (standard 2x10) is not included — buy it locally to save significantly on freight.\u003c\/p\u003e\n\u003ch3\u003eDoes one kit fit both 6ft and 8ft tables?\u003c\/h3\u003e\n\u003cp\u003eYes — the same frame kit builds either a 6ft or an 8ft table.\u003c\/p\u003e\n\u003ch3\u003eWhy is this coating better than standard powder coating?\u003c\/h3\u003e\n\u003cp\u003eMost powder-coated frames get a single spray layer over bare steel. This frame is degreased, acid pickled, and E-coated before the powder coat ever goes on — a 4-step process that gets primer into every weld seam and gives you a real corrosion barrier underneath the color coat, not just on top of it.\u003c\/p\u003e\n\u003ch3\u003eWhat lumber do I need?\u003c\/h3\u003e\n\u003cp\u003eStandard 2x10 boards, cut to your chosen 6ft or 8ft length.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePrefer a galvanized finish instead?\u003c\/strong\u003e See our \u003ca href=\"\/products\/heavy-duty-picnic-table-frame-only-welded-6-8ft-galvanized\"\u003egalvanized frame kit\u003c\/a\u003e.\u003c\/p\u003e","brand":"Park Elements - Frame Kits","offers":[{"title":"Default Title","offer_id":50092806734066,"sku":"CD-60LGH-BLK","price":339.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0784\/3338\/6738\/files\/framekitpicnictable.png?v=1789516911","url":"https:\/\/www.outdoorsiness.com\/products\/heavy-duty-welded-black-powder-coated-picnic-table-frame-kit-2-3-8-od-11-ga-steel-6ft-or-8ft","provider":"Outdoorsiness","version":"1.0","type":"link"}