Commercial-grade 6ft park bench frame kit — welded steel channel, hot-dip galvanized, quick ship.

Same heavy spec as Pilot Rock's CXB Series: 11 ga. die-formed steel seat/back support channel and 2-3/8" OD steel pipe posts — the gold standard for commercial park benches used in parks, campgrounds, schools, and municipalities nationwide. Welded one-piece construction means no loose bolts, no flex, no field assembly headaches.

Priced lower than the competition with no lead time — this ships fast.

Frame Features:

• 11 ga. die-formed steel seat/back support channel — extra heavy duty
• 2-3/8" OD steel pipe frame posts — full commercial spec
• Hot-dip galvanized after fabrication — maximum weather and corrosion protection
• Portable/surface mount — 9/16" anchor holes in foot for optional anchoring (anchor bolts not included)
• Simple clean design works in any setting — parks, trails, campgrounds, streetscapes, schools
• Hardware included
• Frame only — use standard 2x4 lumber, purchased locally to cut freight cost significantly

Buying your lumber locally vs. shipping a fully assembled bench saves substantially on freight — a key reason this is one of the most cost-effective commercial bench options available.

This lightweight, commercial-duty picnic table frame kit is a cost-efficient option for campgrounds and RV parks. The extra-wide, tip-resistant design uses bolt-together 1-5/8" OD x 12 ga pre-zinc-dipped steel end frames, finished in silver powder coat for years of corrosion protection. One of our top sellers.

Ideal applications

Campgrounds, RV parks, parks and budget-conscious municipal projects.

Features

• Bolt-together 1-5/8" OD x 12 ga pre-zinc-dipped steel end frames
• Silver powder-coat finish for corrosion protection
• Extra-wide, tip-resistant design
• Hardware for 2x10 planks included
• Cost-efficient; frame only (lumber not included)

Frequently asked questions

What is included?

The bolt-together galvanized frame and the hardware for 2x10 planks. Lumber is not included — buy it locally to save on freight.

Does one kit fit 6ft and 8ft?

Yes — it builds either length.

Bolted vs welded — which should I choose?

Bolted is the lower-cost, lighter option; for maximum strength, see our welded heavy-duty frame kit.

How does it ship?

It ships freight as a compact frame kit — far cheaper than shipping a fully assembled table.

Compare options: the heavy-duty welded frame kit, or finished thermoplastic picnic tables.

Heavy-duty commercial picnic table frame kit — 6ft or 8ft, welded galvanized steel, in stock and ships fast.

Built with 2-3/8" OD, 11 ga galvanized steel tubing — the same heavy spec used by premium competitors, at a fraction of the price. The welded one-piece construction is structurally stronger than bolted alternatives, and the 11 ga wall thickness is heavier than the 13 ga tubing found on most competing frames. Hardware is stainless steel, not galvanized — won't rust out over years of outdoor exposure.

Frame Features:

• 2-3/8" OD tubing, 11 ga wall — heavier than industry-standard 13 ga
• Welded construction — stronger than bolted frame alternatives
• Stainless steel carriage bolt fasteners included — corrosion-proof
• 1-5/16" OD diagonal braces for structural rigidity
• Extra-wide tip-resistant design — won't tip even with unbalanced load
• Hot-dip galvanized finish with clear lacquer coating
• Works with standard 2x10 lumber — purchase locally to save on freight
• One frame kit fits both 6ft and 8ft tables

Perfect for campgrounds, RV parks, parks, schools, and municipalities. Frame only — lumber not included. Buying lumber locally cuts your total cost significantly compared to purchasing a fully assembled table shipped freight.

Frequently asked questions

What is included?

The welded galvanized steel frame and stainless-steel carriage-bolt hardware. Lumber (standard 2x10) is not included — buy it locally to save significantly on freight.

Does one kit fit both 6ft and 8ft tables?

Yes — the same frame kit builds either a 6ft or an 8ft table.

Why welded instead of bolted?

Welded one-piece construction is structurally stronger and will not loosen over time the way bolted frames can.

What lumber do I need?

Standard 2x10 boards, cut to your chosen 6ft or 8ft length.

Prefer a budget option or a finished table? See the standard-duty bolted frame kit, or our finished thermoplastic picnic tables.