Products

Brand New CL200 KWH Meter, Type C1S, Form 2S, 240v

These units are brand new—not refurbished or reconditioned—and have been redesigned from the ground up to maximize efficiency, accuracy, and long-term reliability. Every component, from the internal architecture to the enclosure design, has been engineered to deliver consistent performance in demanding field environments.

The redesigned platform significantly reduces failure points and operational issues, resulting in exceptionally low service and warranty requests. With a proven 99.99% effective operational rate, these units are built to stay deployed and perform reliably without interruption.

Designed for modern metering applications, this solution delivers the durability, stability, and accuracy required for long-term use—without the maintenance concerns commonly associated with legacy or refurbished equipment.

Solid State AC kWh Meter FM 2S, CL 200, 240V kilowatt-hour meter and is commonly used in a 240v, single phase three wire service.

Features: Solid State Meter 240 Volt, 4 Terminals, 5 Digit LCD, Display

Features:

• This item works with any metered pedestals and most home applications
• 240 volt, 4 terminal, solid state, LCD read out & poly carbonate cover
• Re manufactured & tested for ANSI C12 compliance

Technical Description:

240 volt, 4 terminal, solid state, LCD read out & poly carbonate cover

U075CTL010 Features:

• All in one construction for factory assured terminations
• Rolled edge door for cord protection
• Heavy 16 ga galvanized zinc coated steel with highest quality electro deposition finish resists corrosion and fading
• Welded flange, NEMA 3R construction for lasting service in outdoor installations
• All components are factory wired and assembled, reducing installation time
• Door holds in open position for user convenience
• All terminals accept copper or aluminum wire for added installation flexibility
• Wide range of receptacle configurations
• Broad range of concentric knockouts to accommodate wiring needs
• All units with 12 to 2 copper/aluminum equipment ground lug
• Factory wired from loop feed lugs, located in the post to receptacles, reducing installation time
• Loop feed lugs have twin 2 to 250 MCM terminals minimum per phase, copper/aluminum (some models available up to 350 MCM)
• Rolled edge post bottoms to protect service cable
• Post door removable for installation ease
• Surface heads
• Hub provision
• LC55N1T load center
• Suitable for service equipment
• Twin lugs per phase (loop feed for surface mount units) post options
• GFCI duplex receptacle options

Technical Description: 50/30/20 AMP RV Box
Unmetered Type; G90 Steel Material; Zinc Coated Finish; 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Line), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Aluminum, Line), 14 to 8 AWG Solid, 14 to 1/0 AWG Stranded (Copper, Load), 12 to 8 AWG Solid, 12 to 1/0 AWG Stranded (Copper, Neutral-Large Hole), 10 to 8 AWG Solid, 10 to 1/0 AWG Stranded (Aluminum, Neutral-Large Hole), 14 to 8 AWG Solid, 14 to 4 AWG Stranded (Copper, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 4 AWG Stranded (Aluminum, Neutral-Small Hole), 12 to 8 AWG Solid, 12 to 2 AWG Stranded (Copper/Aluminum, Ground) Wire Size; UL, CUL Approval; NEMA 3R Enclosure; 100 Amp Current Rating; 1-Phase Circuit Configuration; No Illuminated; CB250 First Position Circuit Breaker Type; BR54U Left Position Receptacle Type; CB120 Third Position Circuit Breaker Type; CB130 Second Position Circuit Breaker Type; 5-20R2GFCI Right Position Receptacle Type; R32U Center Position Receptacle Type; Voltage Rating 120/240 Volt; Cabinet Dimension 9-3/4 Inch Width X 5-3/16 Inch Depth X 17-3/8 Inch Height; Mounting Type Surface;

 

Product Specifications: U075CTL010

 
[porto_block id="84415"]

 

U075CTL010 360 Video

https://youtube.com/shorts/g-6u_Ih1zjI?si=Us7CzI2rTTPd9A9B

Constructed of G90 galvanized steel, this ringless metered 50/30/20 Midwest post-mount surface box is made with 16ga steel,  finished with a gray polyester powder-coated paint that is baked on and NEMA 3R rated for outdoor use.  The rolled-edge receptacle door swings up and open and can be locked.  Units come factory wired and are assembled with breakers and receptacles installed

Features:

• All in one construction for factory assured terminations
• Rolled edge door for cord protection
• Heavy 16 ga galvanized zinc coated steel with highest quality electro deposition finish resists corrosion and fading
• Welded flange, NEMA 3R construction for lasting service in outdoor installations
• All components are factory wired and assembled, reducing installation time
• Door holds in open position for user convenience
• All terminals accept copper or aluminum wire for added installation flexibility
• Wide range of receptacle configurations
• Broad range of concentric knockouts to accommodate wiring needs
• All units with 12 to 2 copper/aluminum equipment ground lug
• Rolled edge post bottoms to protect service cable
• Post door removable for installation ease
• Surface heads
• Hub provision

30 Amp RV Receptacle

Enhance your electrical system with the Midwest 70 Amp RV Power Outlet Box. Featuring 30 Amps of maximum power with 20 amp GFI, this durable box features a gray enclosure and is ANSI certified and UL listed for safety. The box is manufactured known for its exceptional quality, durability and commercial rating.

 

Product Information:

• • NEMA 3R weatherproof construction
  • G90 galvanized steel construction for superior corrosion resistance
  • Durable polyester powder coat finish resists chipping and fading
  • All components factory wired and assembled, reducing installation time
  • Door removable for installation ease; stay open position for user convenience
  • All terminals accept copper or aluminum wire for added installation flexibility
  • Broad range of concentric knockouts to accommodate varied wiring needs
  • All units with factory installed Cu/Al equipment ground lug
  • Dead front construction prevents accidental contact with live parts
  • Padlock provision to prevent unauthorized access
  • Rolled edge door for cord protection
  • Conforms to NEC and NEMA standards
  • Cross Reference: CESMPSC41GRHR, U041GP

Heavy-duty commercial picnic table frame kit — 6ft or 8ft, welded galvanized steel, in stock and ships fast.

Built with 2-3/8" OD, 11 ga galvanized steel tubing — the same heavy spec used by premium competitors, at a fraction of the price. The welded one-piece construction is structurally stronger than bolted alternatives, and the 11 ga wall thickness is heavier than the 13 ga tubing found on most competing frames. Hardware is stainless steel, not galvanized — won't rust out over years of outdoor exposure.

Frame Features:

• 2-3/8" OD tubing, 11 ga wall — heavier than industry-standard 13 ga
• Welded construction — stronger than bolted frame alternatives
• Stainless steel carriage bolt fasteners included — corrosion-proof
• 1-5/16" OD diagonal braces for structural rigidity
• Extra-wide tip-resistant design — won't tip even with unbalanced load
• Hot-dip galvanized finish with clear lacquer coating
• Works with standard 2x10 lumber — purchase locally to save on freight
• One frame kit fits both 6ft and 8ft tables

Perfect for campgrounds, RV parks, parks, schools, and municipalities. Frame only — lumber not included. Buying lumber locally cuts your total cost significantly compared to purchasing a fully assembled table shipped freight.

Meter Kit for RV Pedestals / Conversion Single 1 hub" Kit Includes the following items for use with one (1) Single Phase Watthour Meter:

The U075CP6010 50/30/20 is our best selling non metered RV pedestal!  Our pedestals are UL listed as RV supply equipment and perfect for any RV park or Campground.  Tried and tested, our pedestals are currently providing power for RVers in private/state parks, national parks, county and fairgrounds from coast to coat.  Each Pedestal is equipped with a factory wired socket rated to 100 continuous amps. These pedestals are manufactured using 16 - Gauge steel and NEMA 3R construction, both which resist corrosion, fading and provides lasting service.  Units are available in either pad mount or direct bury pedestals and fit all standard round watt hour meters.

RV Pedestal Features:

• Non Metered
• Factory wired receptacles and breakers
• Riveted steel, powder coated for longevity
• Weather proof NEMA 3R and CSA enclosure 3R
• Pad lockable unit
• Direct bury
• Loop Lug
• Breakers: (1) 2-Pole 50 Amp, (1) 1-Pole 30 Amp, (1) 1-Pole 20 Amp and (1) Blank Space.

Technical Description:

Unmetered Type; G90 Galvanized Steel Material; Zinc Coated Finish; 1 AWG to 300 kcmil Solid/Stranded (Copper/Aluminum), 12 to 2 AWG Solid/Stranded (Copper/Aluminum, Ground) Wire Size; UL, CUL Approval; Earth Burial Mounting; NEMA 3R Enclosure

 

Features:

• 30 inch inside diameter - 32 in outside diameter
• Rust-resistant, high-temp, black powder coat
• thick steel with a formed 1” wide flange
• Draft holes for ventilation
• 7-3/8” tall

Enhance your electrical system with the Midwest 50/20 Amp RV Power Outlet Box. Featuring 50 Amps of maximum power with 20 amp GFI, this durable box features a gray enclosure and is ANSI certified and UL listed for safety. The box is manufactured known for its exceptional quality, durability and commercial rating.
 

Product Information

• NEMA 3R weatherproof construction
• G90 galvanized steel construction for superior corrosion resistance
• Durable polyester powder coat finish resists chipping and fading
• All components factory wired and assembled, reducing installation time
• Door removable for installation ease; stay open position for user convenience
• All terminals accept copper or aluminum wire for added installation flexibility
• Broad range of concentric knockouts to accommodate varied wiring needs
• All units with factory installed Cu/Al equipment ground lug
• Dead front construction prevents accidental contact with live parts
• Padlock provision to prevent unauthorized access
• Rolled edge door for cord protection
• Conforms to NEC and NEMA standards
• Cross Reference: CESMPSC55GRHR, GE1LU502SS

From pool to patio, our Strap Chaise Lounge is the most economical solution in commercial chaise lounges. Our 12in chaise lounge is the most economic and cost effective commercial chaise on the market.  With efficiency, style, and comfort these chaises are made for any poolside application. No design expense was spared as these chaises are built with an extra bracing for support and double-wrapped, UV and mildew  resistant 2 in vinyl straps.  The chaise body is constructed of a high quality aluminum body that will not rust and powder-coated in any of our frame finishes.  In addition, our chaise lounges are easily stacked for storage and transportation.

Minimum Order Quantity = 4

View Colors

FRAME COLORS

STRAP COLORS

Discover Our Top-Selling Round Commercial Picnic Table. Our commercial picnic tables have earned their reputation as some of the best metal picnic tables on the market. Crafted with precision from commercial-grade expanded steel and finished with a thermoplastic coating for exceptional durability, these picnic tables are built for the commercial environment. They are the preferred choice at sites across the nation. Their innovative design features expanded steel holes, allowing water to penetrate the surface and making the tables lighter and more portable.

A commercial-grade alternative to Grainger item 4HUP7, Global Industrial item 277150GN, and Uline item H-10001.

These Heritage Style Benches combine nine 2″ × 4″ recycled-plastic slats with powder‑coated, heavy‑duty cast aluminum frames—perfect for lighter commercial applications or home and garden use. A robust under structure, reinforced with both longitudinal and transverse supports, ensures lasting stability. The recycled plastic slats come in a vibrant cedar color, while frame finishes are offered in sleek black. All fastening hardware is marine‑grade stainless steel for superior corrosion resistance.

METER SOCKET(1) 200A 600V 1P3W G90 N3R 4-TERM SMALL HUB COVER PLATE TRIPLEX GRD TOP/BOT FEED

Features:

• 200 amp ringless meter socket
• accepts outdoorsiness meters
• perfect for Meterly 240v meters