Serum Sensitive
Made for sensitive skin.
Serum Sensitive
Made for sensitive skin.
Sort by:
554 products
554 products
MEG APPROVED 50-30-20 RINGLESS Metered GFCI RV Pedestal - Direct Bury - R175MCP6010FMG
MEG APPROVED 50-30-20 RINGLESS Metered GFCI RV Pedestal - Direct Bury - R175MCP6010FMG
RV Pedestal Features:
- Meter Socket rated 100 continuous Amps
- MEG Approved
- RINGLESS meter socket
- 1oo amp main breaker
- Fits all standard round watt hour meters
- Factory wired receptacles and breakers
- Riveted steel, powder coated for longevity
- Weather proof NEMA 3R and CSA enclosure 3R
- Pad lockable unit
- Meters not included*
- Direct bury
Technical Description:
Metered Ringless Type; G90 Galvanized Steel Material; Zinc Coated Finish; 1 AWG to 300 kcmil Solid/Stranded (Copper/Aluminum), 12 to 2 AWG Solid/Stranded (Copper/Aluminum, Ground) Wire Size; UL, CUL Approval; Earth Burial Mounting; NEMA 3R Enclosure
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 1 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 40 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 2 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 52 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 3 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 64 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valv
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 4 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 76 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Merrill Frost Proof Hydrant AFNL7501 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 1ft
Merrill Frost Proof Hydrant AFNL7501 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 1ft
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Hi-Capacity Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 1 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7501 |
| Nominal Size | 3/4 in |
| Overall Length | 45.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |
Merrill Frost Proof Hydrant AFNL7502 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 2ft
Merrill Frost Proof Hydrant AFNL7502 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 2ft
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Hi-Capacity Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 2 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7507 |
| Nominal Size | 3/4 in |
| Overall Length | 57.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |
Merrill Frost Proof Hydrant AFNL7503 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 3ft
Merrill Frost Proof Hydrant AFNL7503 Any Flow® Hi-Capacity Frost-Proof Yard Hydrant - High Use - 3ft
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Hi-Capacity Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 3 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7507 |
| Nominal Size | 3/4 in |
| Overall Length | 69.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |