Sort by:
645 products
645 products
Vinyl Basket Weave Commercial Pool Chaise Lounge with Flat Armrests – 16in
Vinyl Basket Weave Commercial Pool Chaise Lounge with Flat Armrests – 16in
Minimum Order Quantity = 4
From pool to patio, our Basket weave Chaise Lounge is the most economical solution in commercial chaise lounges. This chaise offers both 16 in height and arm rests which offers both comfort and usability. With the users in mind, these chaises are built with an extra bracing for support and durability. In addition, the basket weaved, double-wrapped vinyl straps are made with UV and mildew resistance that will extend the life of your equipment. The chaise body is constructed of a high quality aluminum body that will not rust and powder-coated in any of our frame finishes. In addition, our chaise lounges are easily stacked for storage and transportation.
View Colors
Commercial 46in Circular Single Pedestal Picnic Table – Expanded Metal, In-Ground Mount
Commercial 46in Circular Single Pedestal Picnic Table – Expanded Metal, In-Ground Mount
- Sized for a comfortable experience
- Extra foot space under seats and tabletops
- Umbrella slot in the center most point on the table
- T-shaped support bars come from the center post for each seat
48 Gallon Steel Mesh Commercial Outdoor Trash Can – Corrosion Resistant
48 Gallon Steel Mesh Commercial Outdoor Trash Can – Corrosion Resistant
Our mesh trash cans offer commercial strength at a fraction of the price? The Outdoor Steel-Mesh Corrosion-Resistant Trash Can is perfect for outdoor applications that need simple, strong, steel-made receptacles. This trash can has a rugged and expanded steel-body that is reinforced with circular bands and lateral braces. It is designed to endure extreme climate conditions and resist corrosion.
Features:
- Lid Options Available
- Wide top for ease of disposal
- 48-gallon waste capacity
- 13-gauge steel mesh siding for lasting durability
- Pre-drilled holes at the bottom allows drainage from rainwater
Beach Club 24in Round Acrylic Pool Side Table – Round Aluminum Tubing
Beach Club 24in Round Acrylic Pool Side Table – Round Aluminum Tubing
The Round Acrylic Side Table is a commercial grade table made for outdoor use. This round 24in outdoor table is constructed from rectangular aluminum tubing an acrylic top. The frame may be powder-coated in any frame finish of your choice.
Minimum Order Quantity = 4
Product Description:
From pool to patio, our Sling Chaise Lounge are the standard in commercial pool furniture. Our 14 in sun lounger is the most economic and cost effective commercial chaise on the market. With efficiency, style, and comfort these chaises are made for any poolside application. No design expense was spared as these chaises are built with an extra bracing for support, powder-coated aluminum and double stitched sling fabric. The chaise body is constructed of a 1 in rounded, high quality aluminum body that will not rust and powder-coated in any of our frame finishes. In addition, our chaise lounges are easily stacked for storage and transportation.
M281C1B6H Midwest 200 Amp Manufactured Home Back to Back Pedestal - Ring Type
M281C1B6H Midwest 200 Amp Manufactured Home Back to Back Pedestal - Ring Type
MADE TO ORDER — NON-RETURNABLE, NON-REFUNDABLE.
This item is manufactured specifically for your order and cannot be returned or refunded after purchase.
Merrill Any Flow AFNL7503 No Lead Frost Proof Yard Hydrant – High Use, 3 ft Bury
Merrill Any Flow AFNL7503 No Lead Frost Proof Yard Hydrant – High Use, 3 ft Bury
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 3 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7507 |
| Nominal Size | 3/4 in |
| Overall Length | 69.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |
Merrill Any Flow AFNL7501 No Lead Frost Proof Yard Hydrant – High Use, 1 ft Bury
Merrill Any Flow AFNL7501 No Lead Frost Proof Yard Hydrant – High Use, 1 ft Bury
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 1 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7501 |
| Nominal Size | 3/4 in |
| Overall Length | 45.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 4 ft Bury, PVC
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 4 ft Bury, PVC
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard All PVC Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
| Domestic/Import | Domestic |
| Shut-Off Type | Pivot |
| Overall Length | 76 in |
| Series | Hide-Drant® |
| Bury Depth | 4 ft |
| Nominal Size | 3/4 in |
| End Style | FNPT |
| Type | Standard Frost-Proof |
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, PVC
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, PVC
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard All PVC Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
| Domestic/Import | Domestic |
| Shut-Off Type | Pivot |
| Overall Length | 52 in |
| Series | Hide-Drant® |
| Bury Depth | 2 ft |
| Nominal Size | 3/4 in |
| End Style | FNPT |
| Type | Standard Frost-Proof |
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, Stainless Steel
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, Stainless Steel
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 2 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 52 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Lever Bypass R281CB1034 Midwest 200 Amp Manufactured Home Surface Panel- Ringless style
Lever Bypass R281CB1034 Midwest 200 Amp Manufactured Home Surface Panel- Ringless style
Lever Bypass R281C1P6H034 Midwest 200 Amp Manufactured Home Pedestal - Ringless style
Lever Bypass R281C1P6H034 Midwest 200 Amp Manufactured Home Pedestal - Ringless style
Commercial Double Pedestal Outdoor Bench – Back-to-Back Seating, Thermoplastic Coated
Commercial Double Pedestal Outdoor Bench – Back-to-Back Seating, Thermoplastic Coated
Features:
- Pedestal style allows for front and back seating
- Thick thermoplastic coating
- Large pedestal posts for commercial use
- Multiple seating areas
- Available in expanded or punched steel
Commercial Rolled Edge Park Bench Without Back – Expanded Metal, Thermoplastic Coated
Commercial Rolled Edge Park Bench Without Back – Expanded Metal, Thermoplastic Coated
- 3/4″ 9 Expanded Metal or 1/2″ Punched Steel
- Rolled Edge Seats
- 3/4″ x 2″ Angle Iron Outer Frame
- 1-1/2” x ¼” Flat Steel Inside bracing
- 2-3/8″ Round Tubing Frame Material
- 2″ x 2″ Angle Iron Frame Bracing
- 1″ Round Tubing Diagonal Braces for Portable Benches