Sort by:
556 products
556 products
Merrill Any Temp H-3000 DH7502D Deluxe Heated Frost Proof Yard Hydrant – 2 ft Bury, 3/4 in
Merrill Any Temp H-3000 DH7502D Deluxe Heated Frost Proof Yard Hydrant – 2 ft Bury, 3/4 in
Description
The Any Temp® H-3000 Series water riser/heated hydrant gives year-round water service with use of self-regulating heat cable, or by draining itself below frost line when shut off. The heated hydrant is a simple unit designed to provide frost proof water service. It completes the sanitary installation from buried water line to above ground water connection, or supply pipe with shut-off valve, needed for each mobile or manufactured home.
Merrill™ Deluxe Heated Yard Hydrant, Lead Free, Series: Any Temp® H-3000, 3/4 in Nominal, Pipe Threaded, 2 ft Bury Depth, 30 in Overall Length, 60 psi, Nylon Fiber Reinforced Head, Domestic
Features
- Simply turn clockwise to lock hydrant open or closed and set screw lock provided so hydrant can not be adjusted without a hex wrench, prevent vandalism or accidental shut off of water
- Outlet of hydrant 3/4 in pipe thread molded into Zytel Super Tough by DuPont, one of the world's toughest thermoplastic, standard pipe size for connection and will not corrode
- Water flow thru plunger and 1/2 in galvanized pipe or 3/4 in rigid copper, provides high flow rate needed without increasing cost
- Plunger has (4) ethylene propylene quad ring seals which never come out of adjustment, have longer life than O-rings and withstand higher pressures, longest operating life ring seals
- Heavy molded Delrin® has been used in valves for over forty years and is molded to close tolerance, will not corrode or rust out
- Extra heavy steel collar at ground level to protect hydrant from normal abuse when mowing grass or shoveling snow, hydrant will stand up to years of abuse
- Swivel parts permit withdrawal of all moving parts without digging up hydrant, very simple repair and taken apart with one tool
- Energy efficient heating cable: A high technology self-regulating cable that provides only the amount of heat needed for the varying outdoor temperature and does not waste electricity like the heat rod used by another company
- Longest life and very low cost of operation
- Heating cable built into hydrant can not be stolen like heat rod used by another company, and no electrical hazard since heating cable is not immersed in water flow thru hydrant
- Longest service life and no electrical hazard
- If unit is shut off and unplugged - winterize kit needed
- 3/4 in copper riser pipe
Includes
Specs
| Bury Depth | 2 ft |
| Domestic / Import | Domestic |
| End Style | Pipe Threaded |
| Head Material | Nylon Fiber Reinforced |
| Manufacturer | Merrill |
| Manufacturer # | DH7506D |
| Nominal Size | 3/4 in |
| Overall Length | 30 in |
| Pressure Rating | 60 psi |
| Series | Any Temp® H-3000 |
Merrill Any Flow AFNL7503 No Lead Frost Proof Yard Hydrant – High Use, 3 ft Bury
Merrill Any Flow AFNL7503 No Lead Frost Proof Yard Hydrant – High Use, 3 ft Bury
Description
The Merrill™ Any Flow® Yard Hydrant gives year-round water service; it drains below the frostline when shut off. The Any Flow® hydrant has had only a few improvements since 1949. These improvements, the exclusive features and benefits and the time-proven basic design, is why we believe the Any Flow® is the best yard hydrant manufactured by anyone in the world.
Merrill™ Any Flow® Yard Hydrant, Frost-Proof, Series: Any Flow®, 3/4 in Nominal, NPTxHose Thread, 7 ft Bury Depth, 117-1/2 in Overall Length, 7/16 in Rod Dia, Lever Handle Shut-Off Type, Stainless Steel Rod, Domestic
Features
- Lever control operates by cam principle and provides variable flow from trickle to full force
- Draw straps are made of 1040 hot rolled steel which is much harder (Brinell 175/200) and stronger, greatly reduces wear of straps and eliminates side pull on operating rod
- Stainless steel operating rod is ground and polished and will not cut out packing and packing nut, like brass rod used by other companies, best material for longest operating life
- Heavy duty hose adapter threaded for standard 3/4 in hose coupling
- Extra thick walled head casting greatly reduces breakage and insures longer life
- Pivot connector with two nuts provides simple positive adjustment and eliminates unreliable set screws
- No exposed threads on galvanized rod and threads on galvanized pipe are coated with bitumastic to prevent rusting and prolong life of hydrant
- Extra thick walled valve body to insure longer life and trouble free service
- Patented plunger arrangement ensures even flow from trickle to full force, closes drain at Any Flow® rate and opens drain in off position to prevent freezing
- Krayton G cup seals provides a much longer life than leather, close tolerance uniformity, unaffected by chemicals and passed a 1 million cycle test
- 3/8L beveled bibb washer made of SBR compound with 90 durometer hardness, assures positive shut-off and longer life than soft one piece plunger
- Stainless steel spring takes up slack of normal wear and eliminates numerous adjustments of hydrant head linkage
- Swivel parts permit withdrawal of moving parts without digging up hydrant, nothing in head assembly to disconnect or adjust when removing, simply unscrew entire head assembly from galvanized pipe and pull up valve stem with plunger for inspection
- If parts don't swivel, they could be unscrewed from rod when taking off head above ground
- No lead brass valve body
- 3/4 in no lead hose thread adapter stainless steel operating rod thru Teflon® packing automatic self-adjusting plunger
- Automatic self-adjusting plunger
- 1 in galvanized stand pipe
- Galvanized operating rod
- 3/4 in NPT heavy no lead casting
Specs
| Bury Depth | 3 ft |
| Domestic / Import | Domestic |
| End Style | NPT x Hose Threaded |
| Manufacturer | Merrill |
| Manufacturer # | AFNL7507 |
| Nominal Size | 3/4 in |
| Overall Length | 69.5 in |
| Rod Diameter | 7/16 in |
| Rod Material | Stainless Steel |
| Series | Any Flow® |
| Shut-Off Type | Lever Handle |
| Type | Hi-Capacity Frost-Proof |
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 4 ft Bury, PVC
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 4 ft Bury, PVC
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard All PVC Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
| Domestic/Import | Domestic |
| Shut-Off Type | Pivot |
| Overall Length | 76 in |
| Series | Hide-Drant® |
| Bury Depth | 4 ft |
| Nominal Size | 3/4 in |
| End Style | FNPT |
| Type | Standard Frost-Proof |
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, Stainless Steel
Merrill Hide-Drant Sanitary Removable Frost Proof Hydrant – 2 ft Bury, Stainless Steel
Product Description
The Merrill Hide-Drant is a sanitary yard hydrant that has been approved as such in even the most restrictive states like; Illinois, Indiana, Michigan, Ohio, and Wisconsin. Available in stainless or PVC and with a curved or straight neck, Merrill provides a sanitary hydrant option for you. The Hide-Drant's standpipe can be removed with three counter-clockwise turns, then drain the standpipe of water and your Hide-Drant is frost-proof for freezing temps. The stop valve at the bottom of the Hide-Drant is automatically opened when the standpipe is reinstalled. The seals between the stop valve and the standpipe are water-tight before the valve is reopened. The Hide-Drant's outlet can be set to any direction by simply tightening the standpipe the three turns from where you want the outlet to be.
Specifications:
Standard Stainless Steel Galvanized 3/4" Hide Drant Complete
- Inlet - 3/4" Female NPT into Stainless Steel
- Outlet - 3/4" No-Lead Brass Vacuum Breaker
- 3/4" Galvanized Stand Pipe
- Bottom Case 1-1/2" Sch. 40 PVC
- Repairable Stainless Steel Stop Valve
- * ASSE Approved Vacuum Breaker and Outlet Valve Included ♦ Ball Valve Included
Features
- Frost proof: when used correctly, simply turn counter-clockwise three turns to disconnect and remove stand pipe, then drain stand pipe for freezing temperatures, very simple, no tools required to remove and reinstall stand pipe
- Stop valve at bottom of Hide-Drant® is automatically opened when stand pipe is reinstalled, very simple, reliable stop valve, one moving part, stainless steel spring, also designed so field repairable
- Seals between stop valve and stand pipe holds water before valve is reopened
- Outlet can be in any direction - by simply pivoting outlet counter-clockwise to direction desired, approximately three revolutions needed to remove stand pipe, do not over tighten stand pipe by forcing clockwise revolution of outlet, Only hydrant that allows outlet to be in any direction, no tools required - pivots by hand
- Non-corrosive construction to insure a long operating life, stop valve available in PVC and other components are made of non-corrosive materials, quality, non-corrosive construction for years of service
- Bottom case has one way flapper drain to remove any spilled water in case, plus cover over drain on outside of case protects drain from backfill, helps bottom case and stop valve to stay sanitary
- No tools required (after initial installation) - hydrant riser pipe can be removed and reinstalled in seconds with only a few turns, do not use tools
- Removable riser pipe so you can mow right over the bottom case and improves appearance of landscape for additional applications
- No lead compliance - models available in both yard hydrant and straight models, that are no Lead
- 1-1/2 in SCH 40 PVC bottom case
- 3/4 in SCH 80 PVC stand pipe
- 3/4 in FNPT into extra heavy wall PVC Inlet
- 3/4 in no lead brass vacuum breaker outlet
Includes
Specs
| Bury Depth | 2 ft |
| Domestic / Import | Domestic |
| End Style | FNPT |
| Manufacturer | Merrill |
| Manufacturer # | HIDESS27505 |
| Nominal Size | 3/4 in |
| Overall Length | 52 in |
| Series | Hide-Drant® |
| Type | Standard Frost-Proof |
Lever Bypass R281CB1034 Midwest 200 Amp Manufactured Home Surface Panel- Ringless style
Lever Bypass R281CB1034 Midwest 200 Amp Manufactured Home Surface Panel- Ringless style
Lever Bypass R281C1P6H034 Midwest 200 Amp Manufactured Home Pedestal - Ringless style
Lever Bypass R281C1P6H034 Midwest 200 Amp Manufactured Home Pedestal - Ringless style
Commercial Double Pedestal Outdoor Bench – Back-to-Back Seating, Thermoplastic Coated
Commercial Double Pedestal Outdoor Bench – Back-to-Back Seating, Thermoplastic Coated
Features:
- Pedestal style allows for front and back seating
- Thick thermoplastic coating
- Large pedestal posts for commercial use
- Multiple seating areas
- Available in expanded or punched steel
RING TYPE Pad Mount 50 amp, 30 amp & 20 amp Metered RV Pedestal - M075CP4010
RING TYPE Pad Mount 50 amp, 30 amp & 20 amp Metered RV Pedestal - M075CP4010
Our metered RV pedestals are UL listed as RV supply equipment and perfect for any RV park or Campground. Tried and tested, our pedestals are currently providing power for RVers in private/state parks, national parks, county and fairgrounds from coast to coat. Each Pedestal is equipped with a factory wired socket rated to 100 continuous amps. These pedestals are manufactured using 16 - Gauge steel and NEMA 3R construction, both which resist corrosion, fading and provides lasting service. Units are available in either pad mount or direct bury pedestals and fit all standard round watt hour meters.
RV Pedestal Features:
- Meter Socket rated 100 continuous Amps
- Ring type meter socket
- Fits all standard round watt hour meters
- Factory wired receptacles and breakers
- Riveted steel, powder coated for longevity
- Weather proof NEMA 3R and CSA enclosure 3R
- Pad lockable unit
- Pad Mount - Unit is non returnable
- Breakers: (1) 2-Pole 50 Amp, 10 kAIC, (1) 1-Pole 30 Amp, 10 kAIC, (1) 1-Pole 20 Amp, 10 kAIC.
Features:
- Vertical self-closing covers
with 1/4" diameter lock hasps - Heavy duty, die-cast
aluminum, .094" thick with
powder finish - Stainless steel springs,
screws and shaft for
superior corrosion
protection - Durable heavy duty gasket
- Rain tight
- Adapts to 9” wide
galvanized steel post
Lakeland Mills Cedar Log 47 Inch Roundabout Table & 4 Chair Dining Set
Lakeland Mills Cedar Log 47 Inch Roundabout Table & 4 Chair Dining Set
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!
The specially designed contoured seat slats on our cedar porch swings allows the user to be in complete comfort without having to use a cushion. We rounded and sanded our ends so as not to cut into the backs of legs or knees when sitting.
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!
Product Dimensions
- Length: 86″
- Height: 66″
- Overall Height: 66″
- Width: 65″
This beautiful 5’ yard swing will enhance any yard. It’s durable construction is due in part to the Northern White Cedar logs that are naturally insect and rot resistant. The heavy duty hardware used is coated to protect it from the elements. This swing will last for years, on average, between 10-20 years. Cheap, imported imitations cannot compare to the quality that goes into our swings. Other swings, made from Chinese Fir, are not rot and insect resistant, and may only last 1-3 years before have to replace it.
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!
With our specially designed contoured seat slats, allows the user to be in complete comfort without having to use a cushion. We rounded and sanded our ends so as not to cut into the backs of legs or knees when sitting.
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!
Being crafted from naturally rot resistant Northern White Cedar logs, this rustic log a-frame will last between 10 and 20 years.
- Strong, durable Northern White Cedar
- This wood is naturally rot and insect resistant..
- Easy to assemble with common tools.
- Our Products are made in the USA!